White Papers

Technical support and resources
Document 339
Multihomed Appliance
Configure Static Routes window
To add a static route, do the following:
1. Select Configure Static Routes from the TUI menu.
2. Select the interface to which the routes should be applied.
The configure static routes dialog box is displayed.
3. Enter the NETWORK address in CIDR format.
4. Enter the GATEWAY address, then select Apply Routes.
To remove a static route, highlight the Remove option beside the route to be removed and press enter. After
removing routes, select Apply Routes to apply the new settings.
Open Manage
Enterprise
Gateway
100.10.10.70/24
(public)
173.10.1.33/24
(
private
)
100.10.10.0/24
173.10.1.0/24
Router
173.10.1.1
173.10.3.0/24
Managed
System
173.10.3.7
100.10.10.1
Internet
The appliance cannot route
to this system without the
addition of a static route.
Managed
System
173.10.1.35
No static route is required
since the managed system
and appliance are connected
directly to the same subnet.