Users Guide

Table 9. OpenManage Enterprise Supported protocols and ports on management stations (continued)
Port
Number
Protocol Port Type Maximum
Encryption
Level
Source Direction Destination Usage
514 Syslog TCP None OpenManage
Enterprise
appliance
Out Syslog server
• To send alert and
audit log
information to
Syslog server.
3269 LDAPS TCP None OpenManage
Enterprise
appliance
Out Management
station
• AD/ LDAP login for
Global Catalog.
636 LDAPS TCP None OpenManage
Enterprise
appliance
Out Management
station
• AD/ LDAP login for
Domain Controller.
*Port can be configured up to 499 excluding the port numbers that are already allocated.
Supported protocols and ports on managed nodes
Table 10. OpenManage Enterprise supported protocols and ports on the managed nodes
Port
Number
Protocol Port
Type
Maximum
Encryption
Level
Source Direction Destination Usage
22 SSH TCP 256-bit OpenManage
Enterprise
appliance
Out Managed
node
• For the Linux OS, Windows, and
Hyper-V discovery.
161 SNMP UDP None OpenManage
Enterprise
appliance
Out Managed
node
• For SNMP queries.
162* SNMP UDP None OpenManage
Enterprise
appliance
In/ Out Managed
node
• Send and receive SNMP traps.
443 Proprietar
y/ WS-
Man/
Redfish
TCP 256-bit OpenManage
Enterprise
appliance
Out Managed
node
• Discovery and inventory of iDRAC7
and later versions.
• For the CMC management.
623 IPMI/
RMCP
UDP None OpenManage
Enterprise
appliance
Out Managed
node
• IPMI access through LAN.
69 TFTP UDP None CMC In Managemen
t station
• For updating CMC firmware.
* Port can be configured up to 499 excluding the port numbers that are already allocated.
NOTE:
In an IPv6 environment, you must enable IPv6 and disable IPv4 in the OpenManage Enterprise appliance to
ensure all the features work as expected.
30 Get started with OpenManage Enterprise