Users Guide

Table 7. Text User Interface options (continued)
Options Descriptions
firewall rules are applied to the primary interface, which allow for
tighter access control such as access restriction by IP range.
NOTE: If multihoming is enabled, the appliance can be
accessed from two networks. In this case, the primary
interface is used by the appliance for all external
communication and when proxy settings are used. For
more information about multihoming on OpenManage,
see Remote script execution with Dell EMC OpenManage
Enterprise technical white paper on the support site.
Configure Static Routes Select Configure Static Routes if the networks require a static
route to be configured to reach a specific subnet over the IPv4 and
IPv6 networks.
NOTE: A maximum of 20 static routes per interface is
supported.
Configure Server Initiated Discovery Select Configure Server Initiated Discovery to allow the
appliance to automatically register the required records with the
configured DNS server.
NOTE:
• Ensure that the appliance is registered with DNS,
and can dynamically update records.
• The target systems must be configured to request
registration details from DNS.
• To change the DNS Domain Name, ensure Dynamic
DNS registration is enabled on the DNS server. Also,
for appliance to be registered on the DNS server,
select the Nonsecure and secure option under
Dynamic updates.
Enable Field Service Debug (FSD) Mode Select Enable Field Service Debug (FSD) Mode for console
debugging. For more information, see Field service debug workflow
on page 153.
Restart Services Select Restart Services with the following options to restart the
services and networking:
• Restart All Services
• Restart Networking
Setup Debug Logging Select Setup Debug Logging using the following options :
• Enable Debug Logs—to collect the Debug logs of the
application monitoring tasks, events, and the task execution
history.
• Disable Debug Logs—to disable the Debug logs.
• Enable SCP Retention—to collect the template .XML files.
• Disable SCP Retention—to disable the SCP retention.
You can download the debug logs by clicking Monitor > Audit
Logs > Export > Export Console Logs in OpenManage
Enterprise.
Change keyboard layout Select Change keyboard layout to change the keyboard layout if
needed.
Reboot the Appliance Select Reboot the Appliance to restart the appliance.
NOTE: After running a command to restart the services,
the TUI may display the following message: NMI
26 Get started with OpenManage Enterprise