Release Notes
Description: The firmware update task using the HTTP and HTTPS local shares fails, if these local shares were configured using proxy
settings and are not listed in the proxy exception list. [151332]
Resolution: The HTTP and HTTPS local shares which are configured using the proxy settings, need to be listed in the proxy exception list
before initiating any firmware update tasks using these shares.
Issue 3
Description: Firmware upgrade fails when iDRAC firmware versions older than 2.40.40.40 are upgraded directly to 2.63.60.61 with an
error message Unable to verify Update Package signature. This failure happens as the firmware versions older than 2.40.40.40 cannot
validate the latest SHA-256 digital signature of the Dell Update Packages. [146564]
Resolution: First upgrade the older iDRAC firmware versions to 2.40.40.40 before attempting an upgrade to iDRAC firmware version
2.63.60.61.
Issue 4
Description: The Update Firmware button remains enabled even when there are no firmware catalogs available for upgrade or
downgrade. [108218]
Issue 5
Description: The firmware rollback on PowerEdge MX7000 is not supported. Also, rollback on sleds is not supported when the onboarding
state of the sleds is Proxied.[116172]
Issue 6
Description: A job for firmware rollback on PowerEdge MX7000 sleds, though allowed in the appliance, would fail. This happens due to the
fact that the firmware rollback is not supported on MX Series sleds discovered as part of MX7000 chassis discovery or in proxied state.
[136820]
Configuration management
Issue 1
Description: The Reclaim Identities and Profile Migration features are not supported for Emulex OneConnect Cards. [98511]
Issue 2
Description: If the MX7000 chassis is in the 'monitored' state during stateless deployment, the deployment job fails because the user does
not have necessary privileges. Only the server configuration profile is imported. However, this information is not displayed in the Task
Execution section. [108484]
Issue 3
Description: The changed VLAN name and IDs are not updated on the target MX7000 chassis after a stateless deployment task is run.
[105156]
Issue 4
Description: If the IP setting is not configured on the discovered PowerEdge MX740C and PowerEdge MX840C, the Boot to Network
ISO operation is not run during the template deployment. [102887]
Issue 5
Description: After deploying an MX7000 chassis template, you cannot log in to the MX7000 chassis with LDAP credentials. [107230]
Resolution: Manually update the LDAP bind password to log in.
Issue 6
Description: The deployment task of an MX7000 chassis fails if proxy authentication in enabled in the configuration template with error:
'Unable to complete the request because the input value for Password is missing or an invalid value is entered'. [108779]
Issue 7
Description: The directory service details in an MX7000 chassis are overwritten after the device configuration template is deployed.
Issue 8
Description: After a chassis is removed from the MCM group, you must rediscover the lead and member chassis to create and deploy a
configuration template.
Issue 9
Description: The Migration Profile task fails if the user is not configured on the target device with the error: 'User Name is not configured
'. [107376]
4
Dell EMC OpenManage Enterprise Version 3.3.1 Release Notes