White Papers

8 Dell EMC Repository Manager Integration with Dell EMC OpenManage Enterprise | Technical white paper
4 Configuring Dell EMC OpenManage Enterprise repository
using Dell EMC Repository Manager
Here we discuss about the detailed procedure of configuring the Dell EMC OpenManage repository using
DRM.
Assuming that you already have Dell EMC OpenManage Enterprise application installed and your Dell
devices discovered and managed through the application, the procedure would walk you through installation,
configuration and then integration of DRM.
4.1 Install Dell EMC Repository Manager
Dell EMC OpenManage Enterprise can be easily integrated with DRM from DRM 3.0 onwards. However, the
way the integration happens is a little different post DRM 3.2. We would recommend using the latest available
version of DRM from https://support.dell.com and searching for “Dell EMC Repository Manager”
Also, from DRM 3.0 onwards there is an option to install DRM on both Windows and Linux systems.
After you have identified the required DRM version, you can proceed with the below steps to install DRM on
your choice of system.
1. Click Download Now link to download the.EXE or .BIN file.
2. The File Download window is displayed, click Save to save the file to the hard drive.
3. Browse to the folder where the files are saved
4. Provide executable permission for the file on Linux.
5. Execute the file and follow the instructions
Note: Upgrade from DRM 2.x is not supported for DRM 3.2.0. The existing configuration and repositories can
be migrated from existing DRM 2.x installation on Windows by using the installation wizard page for migration.