Release Notes

Fixed issues
Table 1. Issues fixed in this release
Issue Reference Summary
135343 Fixed the issue to retrieve warranty information of managed devices when the appliance is configured
using authenticated proxy settings.
130453 Fixed the issue with setting up push notification for OpenManage Mobile where an error message
"Hostname can't be null - Code 1002" would appear.
141847 Fixed the upgrade to 3.2.1 from any supported upgrade path when the user had a pre-canned template
cloned in 1.0.
139446 Fixed the issue with Intel XXV710 based NICs not being listed in the Device Firmware Compliance Page.
141224 Fixed the issue with DNS names not being displayed for chassis on the All Devices page.
142237 Fixed the issue with the Firmware Compliance report not listing components that have Component ID as
0 or Null.
Known issues
Discovery and inventory
Issue 1
Description: The management IP on the Device Details page of the discovered VxRail devices does not match the management IP
displayed on the All Devices page. [91653]
Issue 2
Description: If the onboarding state of the lead chassis and member chassis in an MCM group is in monitored state, the inventory task
might fail if the MCM group is configured with more than 10 chassis. [108962]
Issue 3
Description: The exported inventory file lists values for component status and URL of the chassis is not listed. [108056]
Issue 4
Description: Servers that are reconfigured as VxRAIL do not automatically group under HCI upon refreshing the inventory. [116913]
Resolution: After a server is reconfigured as a VxRAIL, rediscover the device in the Discovery page. After rediscovery, the device is
correctly grouped under HCI.
Issue 5
Description: The All Devices page shows health status of the discovered 11G servers with iDRAC firmware version 1.98 or later as
unknown.
Issue 6
Description: The iDRAC virtual console management launch point is unavailable in the All Devices page for sleds with a 'Proxied'
onboarding state.
Resolution: Ensure the sleds are in a 'Managed' state.
Issue 7
Description: For the discovered PowerVault MD3 series storage arrays, the complete model numbers are not displayed by the appliance in
the All Devices page. For these devices, the model numbers as returned from the SNMP walk are displayed.[119881]
Issue 8
Description: In order to support discovery with domain credentials, OpenManage Enterprise 3.2 and later uses SSH instead of WSMAN.
Hence, All the Windows and Hyper-V devices discovered prior to updating the appliance have to be deleted and re-discovered using their
SSH credentials.
Issue 9
Dell EMC OpenManage Enterprise Version 3.2.1 Release Notes
3