White Papers

9 Deployment and Migration of Boot from SAN Configuration using Dell EMC OpenManage Enterprise version
3.3.1
6. The iSCSI target parameters contain the Target IP address, Boot LUN, iSCSI Name etc. These values
are not assigned via DHCP, as the General parameters are set to static.
7. Once the Initiator and Target iSCSI parameters are configured, the base system is then available for
connection with the storage target LUN. However, this configuration uses the physical identities
hardwired to the NIC card and the data is prone to loss in case of failure.
OpenManage Enterprise, using ‘stateless’ computing, assigns virtual identities for each iSCSI
parameters and ensures no identities are tied to the server.