Dell EMC OpenManage Enterprise Version 3.4.1 Release Notes July 2020 Rev.
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2017 - 2020 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents Chapter 1: ..................................................................................................................................... 4 Dell EMC OpenManage Enterprise Version 3.4.1 Release Notes.................................................................................... 4 Release type and definition.............................................................................................................................................4 What is supported........................
1 Topics: • Dell EMC OpenManage Enterprise Version 3.4.1 Release Notes Dell EMC OpenManage Enterprise Version 3.4.1 Release Notes This document describes the new features, enhancements, known issues, and fixed issues in Dell EMC OpenManage Enterprise version 3.4.1. Release type and definition Dell EMC OpenManage Enterprise OpenManage Enterprise is a systems management and monitoring web application delivered as a virtual appliance.
What is supported For a complete list of supported devices, operating systems, and web browsers, see the Dell EMC OpenManage Enterprise Version 3.4 Support Matrix at Delltechcenter.com/OMEnt or Dell.com/OpenManageManuals. New in this release (version 3.4 and version 3.4.1) • • • • • • • Server-initiated discovery—With this feature, new servers in a datacenter can notify OpenManage Enterprise and can get automatically discovered. Servers should have a firmware version of 4.00.00.00 or later.
Known issues Discovery and inventory Issue 1 Description: Discovery of Windows server(s) using non-admin credentials fails with an error message 'Unable to connect to the device over SSH because a connection error occurred.' This must be interpreted instead as 'Unable to perform the requested action because the device management endpoint authentication over SSH failed'.
Description: The iDRAC virtual console management launch point is unavailable in the All Devices page for sleds with a 'Proxied' onboarding state. Resolution: Ensure the sleds are in a 'Managed' state. Issue 15 Description: For the discovered PowerVault MD3 series storage arrays, the complete model numbers are not displayed by the appliance in the All Devices page. For these devices, the model numbers as returned from the SNMP walk are displayed.
Issue 7 Description: AMD chipset driver update on the R6525 servers fails using OpenManage Enterprise Firmware/driver update feature. [159058] Resolution: Windows (64-bit) driver updates for R6525 AMD chipsets must be done manually outside of the appliance. Issue 8 Description: The firmware update task using the HTTP and HTTPS local shares fails, if these local shares were configured using proxy settings and are not listed in the proxy exception list.
Description: After deploying an MX7000 chassis template, you cannot log in to the MX7000 chassis with LDAP credentials. [107230] Resolution: Manually update the LDAP Bind password to log in. Issue 7 Description: If a chassis template is deployed with a new static IP address on the FX2, VRTX, and M1000e chassis, then these devices need to be re-discovered with the new IP for managing the device.
Issue 4 Description: When a Lead chassis retires and a backup chassis becomes the new lead on OpenManage Enterprise, the refresh inventory marks the original backup chassis and its associated devices to be invisible and not shown in the UI. [161300] Resolution: Discover the new Lead on OpenManage Enterprise. Issue 5 Description: "Virtual identity by usage report" does not display the identity state as "Used" when the virtual identities were assigned to a device from an external source.
Description: There is currently a discrepancy between the actual number of MIBs imported and the MIB count displayed on the Monitor > MIB page. [160040] Issue 18 Description: When NIC teaming is enabled on MX7000 chassis along with VLAN configuration, deploying of VLAN from the OpenManage Enterprise console will overwrite the NIC teaming configurations to 'No teaming'. The LACP or other teaming options would need to be reconfigured from MX7000.
Resolution: OpenManage Enterprise includes CentOS kernel patches for the TCP SACK Panic issues and carries the updated kernel-3.10.0-957.21.3.el7.x86_64.rpm including fixes for the CVE-2019-11477 vulnerability. Issue 30 Description: Post console update Time interval should be enabled manually in alert policy as it is disabled by default. Issue 31 Description: Alert policies have been recategorized since OpenManage Enterprise version 3.3.1. The alert policies from appliance versions before 3.3.
Issue 44 Description: Currently, the health status including PSU and temperature data is not displayed for the storage devices. [99821] Resolution: N/A Issue 45 Description: : The rollback feature is not supported on the MX7000 chassis. Also, the rollback operation fails on the M1000e, FX2, and FX2s chassis. [110239] Resolution: For M1000e, FX2, and FX2s chassis, create and associate a new baseline with the necessary firmware version to roll back.
Description: After the console is upgraded, there is a delay of approximately 15 minutes in the initiation of the Post Upgrade task by the appliance. [130142] Issue 58 Description: When an already imported MIB is renamed and parsed through API the trap status is reported as 'Existing' instead of 'Imported.
Installation prerequisites and minimum requirements For a list of supported platforms, operating systems, and browsers, see the Dell EMC OpenManage Enterprise Version 3.4 Support Matrix on the support site and Dell TechCenter. To install OpenManage Enterprise, you must have the local system administrator rights and the system you are using must meet the criteria. See the Dell EMC OpenManage Enterprise User's Guide on the support site and Dell TechCenter.
• • • ○ C = Cloud - Modular server nodes for hyper-scale environments ○ F = Flexible - Hybrid rack-based sleds for rack-based FX2/FX2s enclosure ○ M or MX* = Modular - Blade servers for the modular enclosure MX7000, M1000e and/or VRTX ○ R = Rack-mountable servers ○ T = Tower Servers The letter X (digit) denotes the class (number of processors) of the server. The digit 4 denotes the generation of the server. The letter X (digit) denotes the make of the processor. Table 3.
