White Papers

Set up Auto-Deploy Configuration
13 Auto-Deploy Provisioning on Servers or Chassis Using DellEMC OpenManage Enterprise 3.2 | Technical white
paper
2.4 Delete Auto-Deploy configurations
To delete the auto-deploy configuration/s:
• On the Auto Deploy page (Configuration > Auto Deploy), select the configuration/s by clicking on the
check box beside identifier.
• Click Delete. An Alert, “Are you sure you want to delete all the selected items” will be displayed-
click on YES to delete or NO to retain the configuration/s.
Figure 10: Auto deploy delete wizard
• Note: If an Auto-deploy configuration is deleted before discovering the device, then the auto
deployment task will not be triggered when the device is discovered.