Users Guide

FC-Identität
einschließen
Aktivieren Sie das Kontrollkästchen, um FC-Adressen zum Identitäts-Pool hinzuzufügen.
Post-Fix (6
Oktette)
Geben Sie den Post-Fix in einem der nachfolgenden Formate ein:
• AA:BB:CC:DD:EE:FF
• AA-BB-CC-DD-EE-FF
• AABB.CCDD.EEFF
Die Länge des Post-Fix darf maximal 50 Zeichen betragen. Diese Option wird nur angezeigt, wenn das
Kontrollkästchen FC-Identität einschließen aktiviert ist.
Anzahl der
WWPN-WWNN-
Adressen
Wählen Sie die Nummer der WWPN oder WWNN Adresse aus. Die Adresse kann zwischen 1 und 5000 liegen.
Diese Option wird nur angezeigt, wenn das Kontrollkästchen FC-Identität einschließen aktiviert ist.
Maßnahmen
Zurück Zeigt die Registerkarte FCoE an.
Fertig stellen Speichert die Änderungen und zeigt die Seite Konfiguration an.
Abbrechen Schließt das Fenster Identitäts-Pool erstellen, ohne die Änderungen zu speichern.
Create Identity Pool - iSCSI
You can configure the required number of iSCSI MAC addresses in the iSCSI tab.
ANMERKUNG:
The iSCSI attributes are applied only when the DHCP option for iSCSI Initiator is disabled in the source
template.
Include iSCSI MAC
Addresses
Select the check box to add the iSCSI MAC addresses to the identity pool.
Starting MAC
Address
Enter the starting MAC address of the identity pool in one of the following formats:
• AA:BB:CC:DD:EE:FF
• AA-BB-CC-DD-EE-FF
• AABB.CCDD.EEFF
The maximum length of a MAC address is 50 characters. This option is displayed only if the Include iSCSI MAC
Addresses check box is selected.
Number of iSCSI
MAC addresses
Enter the number of iSCSI MAC addresses. The MAC address can be between 1 and 5000. This option is
displayed only if the Include iSCSI MAC Addresses check box is selected.
Configure iSCSI
Initiator
Select the check box to configure the iSCSI initiator. This option is displayed only if the Include iSCSI MAC
Addresses check box is selected.
IQN Prefix Enter the IQN prefix of iSCSI identity pool. The length of the IQN prefix is a maximum of 200 characters. The
system generates the pool of IQN addresses automatically by appending the generated number to the prefix. For
example: <IQN Prefix>.<number>
This option is displayed only if the Configure iSCSI Initiator check box is selected.
ANMERKUNG: The IQN configured with identity pools is not deployed on the target system if the
boot mode is "BIOS".
ANMERKUNG: If the iSCSI initiator name is displayed in a separate line in the Identity Pools >
Usage > iSCSI IQN field, then, it indicates that the iSCSI IQN is enabled only on that NIC partition.
Enable iSCSI
Initiator IP Pool
Select the check box to configure a pool of iSCSI initiator identities. This option is displayed only if the Include
iSCSI MAC Addresses check box is selected.
Gerätekonfigurationsvorlagen verwalten 55