Users Guide

3. To view the usage of these identity definitions, click the Usage tab and select the View By filter option.

Edit identity pools

You can edit an identity pool to add ranges that you had not specified earlier, add an identity type, or delete identity type ranges.

To edit the definitions of an identity pool:

1. On the Configuration page, click Identity Pools.

2. Select the identity pool, and then click Edit.

The Edit Identity Pool dialog box is displayed.

3. Make the changes to the definitions in the appropriate sections, and then click Finish.

The identity pool is now modified.

Define networks

1. On the Configuration page, click Networks.

2. Click Define.

3. In the Define Network dialog box, enter a name and an appropriate description.

4. Enter the VLAN ID, and then select the network type.

5. Click Finish.

The network currently configured in your environment is now defined and resources can access the network. You can also export the list

of networks as a .csv file by clicking the Export button.

Edit or delete a configured network

1. On the Configuration page, click Networks.

2. Select a network from the list, and then click Edit in the right pane to change the name, description, VLAN ID, or the network type.

NOTE:

As IPv6 addressing is not supported by M I/O Aggregator (IOA) and FN I/O modules, VLAN configuration on

M1000e and FX2 chassis is not supported in an IPv6 infra.

NOTE: In OpenManage Enterprise 3.0, the changed VLAN name and IDs are not updated on the target MX7000

chassis after a stateless deployment task is run.

3. To delete the network, select the network and click Delete.

4. Click Yes.

Stateless deployment

NOTE:

To perform any tasks on OpenManage Enterprise, you must have necessary user privileges. See Role-based

OpenManage Enterprise user privileges.

Before you perform a stateless deployment, ensure that:

• You have either created a device deployment template or cloned a sample template. See Create a template.

• You have created and configured an identity pool. See Create identity pools.

• The target devices meet the requirements specified in Minimum system requirements for deploying OpenManange Enterprise.

• The OpenManage Enterprise license is installed on all the target devices.

NOTE: Identity pools cannot be associated to templates created in earlier versions of OpenManage Enterprise.

1. From the list of templates, select the check box corresponding to the device whose template must be deployed.

2. Click Edit Network.

3. In the Edit Network dialog box, select the identity pool, and the Tagged and Untagged network.

4. Enter the maximum and minimum bandwidth and click Finish.

5. On the Template Details page, click Deploy Template.

6. In the Deploy Template: <template name> dialog box, under Target:

Manage device configuration templates