Release Notes

Firmware and driver updates
Issue 1
Description: In-band driver updates are only supported on Windows with OpenSSH. Driver updates on third party SSH hosted
on Windows, such as the CygwinSSH, are not supported. [157887]
Issue 2
Description: For the family of network adapter drivers, the operating system installed version, as seen in the Device Manager,
differs from the version available in the online catalog. [157824]
Issue 3
Description: PERC H730P controller driver is not listed in the Firmware/Driver compliance report as it is currently not included
in the online firmware/driver catalog. However, as this driver is a part of the Windows' server inventory, it is listed in the
Inventory report of the windows devices.[163175]
Issue 4
Description: The firmware or driver compliance status of network switches, modular IOAs, and Dell storage devices may show
as "Compliant" (but unselectable) in the firmware/driver compliance reports even though update of these devices are not
supported by the Dell catalog.
Resolution: It is recommended to perform individual firmware or driver updates for these devices using their respective
individual Update package. To perform individual firmware or driver updates, select a device on the All Devices page, and click
View Details > Firmware/Drivers and select the individual package option. For more information about the list of unsupported
devices, refer the OpenManage Enterprise version 3.4 User's Guide (Firmware/driver compliance baseline reports—'false'
compliant devices)
Issue 5
Description: Driver update on PowerEdge RAID Controller (PERC) S140 controller fails when the SATA is in AHCI mode.
[159735]
Resolution: As a prerequisite to update the PERC S140 controller driver, RAID mode must be enabled for SATA in BIOS. For
more information, see the Dell EMC PowerEdge RAID Controller S140 User's Guide.
Issue 6
Description: The Clear Jobs and iDRAC reset functions for firmware updates are not supported for devices under the MCM
chassis which are in a 'Proxied' onboarding state. [128765]
Issue 7
Description: AMD chipset driver update on the R6525 servers fails using OpenManage Enterprise Firmware/driver update
feature. [159058]
Resolution: Windows (64-bit) driver updates for R6525 AMD chipsets must be done manually outside of the appliance.
Issue 8
Description: The firmware update task using the HTTP and HTTPS local shares fails, if these local shares were configured
using proxy settings and are not listed in the proxy exception list. [151332]
Resolution: The HTTP and HTTPS local shares which are configured using the proxy settings, need to be listed in the proxy
exception list before initiating any firmware update tasks using these shares.
Issue 9
Description: Firmware upgrade fails when iDRAC firmware versions older than 2.40.40.40 are upgraded directly to 2.63.60.61
with an error message Unable to verify Update Package signature. This failure happens as the firmware versions older than
2.40.40.40 cannot validate the latest SHA-256 digital signature of the Dell Update Packages. [146564]
Resolution: First upgrade the older iDRAC firmware versions to 2.40.40.40 before attempting an upgrade to iDRAC firmware
version 2.63.60.61.
Issue 10
Description: The Update Firmware button remains enabled even when there are no firmware catalogs available for upgrade or
downgrade. [108218]
Issue 11
Description: The firmware rollback on the PowerEdge MX7000 sleds is not supported. Also, rollback on sleds is not supported
when the onboarding state of the sleds is Proxied.[116172]
8