Dell EMC OpenManage Enterprise Version 3.7 Support Matrix July 2021 Rev.
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2017 - 2021 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
1 Introduction OpenManage Enterprise is a systems management and monitoring web application delivered as a virtual appliance. It provides a comprehensive view of the Dell EMC servers, chassis, storage, and network switches on the enterprise network. With OpenManage Enterprise, a web-based one‑to‑many systems management application, users can: ● Discover devices in a data center environment. ● View hardware inventory and monitor health of devices.
Table 1. Agents and interfaces supported by OpenManage Enterprise version 3.7 (continued) Dell EMC system agents and interfaces Supported version ● iDRAC 4.40.40.00 ● iDRAC 5.00.00.00 iDRAC7 and iDRAC8 All ● ● ● the YX3X (13G) and YX2X (12G) PowerEdge servers — 2.70.70.70 2.75.75.75 2.80.80.80 NOTE: Ensure that Express or Enterprise licenses are available to perform firmware updates. iDRAC6 All the YX1X (11G) PowerEdge servers: For the monolithic systems — 1.
Table 2.
Table 2.
Table 2.
Table 4.
Table 5. Supported XE Series devices (continued) Supported OpenManage Enterprise features XE Series Devices Discovery and inventory Monitoring and device alerts Managing device firmware Managing device configurations and deployment PowerEdge XE7420 Yes Yes Yes Yes PowerEdge XE7440 Yes Yes Yes Yes PowerEdge XE8545 * Yes Yes Yes Yes NOTE: * indicates device added in this release. Supported Dell EMC XR Series The following table lists the supported XR Series devices. Table 6.
Table 8. Supported Input/Output Aggregators (IOA) (continued) PowerEdge chassis devices Supported IOAs Managing device configurations and deployment Dell Networking OS version PowerEdge FX2s FN410S Yes OS9 PowerEdge FX2s FN410T Yes OS9 Supported Dell EMC VxRail Hyper-converged appliances The following table lists the supported VxRail Hyper-converged appliances. Table 9.
Table 10. Supported Dell Storage modules Supported OpenManage Enterprise features Inventory Monitoring health Managing device firmware Managing device configurations and deployment PowerEdge FD332 Yes Yes No No PowerEdge MX5016S Yes Yes Yes No Storage module Supported Dell Storage devices—previously Dell Compellent devices The following table lists the supported Dell Storage devices—previously Dell Compellent devices. Table 11.
Table 12. Supported Dell Storage devices - PowerVault MD Series (continued) Supported OpenManage Enterprise features Discovery and inventory Monitoring and device alerts Managing device firmware Managing device configurations and deployment MD3400 Yes Yes No No MD3420 Yes Yes No No MD3460 Yes Yes No No MD3060e Yes Yes No No Storage devices The following table lists the supported Dell Storage devices grouped under the DELL EMC PowerVault ME4 Series. Table 13.
Table 15. Supported Networking devices (continued) Supported OpenManage Enterprise features Networking devices Discovery and inventory Monitoring and device alerts Managing device firmware Managing device configurations and deployment Dell Networking OS version managed via M1000e chassis. N3248TE Yes Yes No No OS10.5.2.
OEM devices Dell EMC OEM devices (rebranded or debranded PowerEdge servers), when discovered, are classified under SYSTEM GROUPS > All Devices > Servers > OEM Servers on the All Devices page. If both the server and RAC of the OEM device are discovered, they are correlated and displayed as one device under the OEM Devices group. Most of the functionality available to the PowerEdge servers—such as tasks, reports, and filters—are also available to the PowerEdge OEM servers.
Table 16. Supported operating systems on managed nodes (continued) Supported OpenManage Enterprise features Discovery and Inventory Device Alerts Managing device configurations and deployment Driver Update Windows 2019 Yes Yes No Yes Azure Stack HCI Yes Yes No No ESXi 7.0 Yes Yes No No ESXi 7.0 U1 Yes Yes No No ESXi 7.0 U2 Yes Yes No No ESXi 6.7 U3 Yes Yes No No RHEL 7.8 Yes Yes No No RHEL 7.9 Yes Yes No No RHEL 8.1 Yes Yes No No RHEL 8.
Table 17. Supported Plugins (continued) Supported Plugin Plugin Function Dell EMC CloudIQ Enables administrators to register with the Dell EMC CloudIQ, select the device groups for data transfer to CloudIQ for proactive monitoring and measurement of overall health of the selected devices. Minimum recommended hardware This table describes the minimum recommended hardware for OpenManage Enterprise. Table 18.