White Papers

A Technical support and resources
29 Benchmark the Performance, Reliability, and Scalability of Dell EMC OpenManage Enterprise 3.4 in your data
center environment | 14465
Memory mapping for Discovery,Inventory and Statusing of 20 MX7000 chassis MCM setup
4.2 Test setup and results of the Firmware Upgrade feature in
OpenManage Enterprise 3.4 (tested on 10 MX7000 chassis)
Note:
OME supports monitoring of 20 Chassis MCM but the firmware update is only supported for 10 Chassis MCM
when the number of SLEDs does not exceed 43.
Also, OME 3.4 does not support firmware upgrade on IOMs.
Note:
Maximum 9 member MX7000 chassis can be updated in a single firmware update task. It is mandatory to
update the member chassis first. This is applicable only if you are upgrading from 1.10.20 or lower.
Once all the member chassis are updated, the lead chassis can be updated.
Test Setup configuration details used for Firmware update of 10 chassis MCM setup
Device used for Firmware Update in 10 Chassis
MCM step
Number of Devices populated
MX7000 chassis
10 (1 Lead Chassis, 9 Member chassis)
PowerEdge MX740c Sled
31
PowerEdge MX840c sled
12
• Chassis and SLEDs should not be updated together.