White Papers

Scalability and performance test results of OpenManage Enterprise 3.4 (tested on multiple PowerEdge servers)
13 Benchmark the Performance, Reliability, and Scalability of Dell EMC OpenManage Enterprise 3.4 in your data
center environment | 14465
3. Scalability and performance test results of OpenManage
Enterprise 3.4 (tested on multiple PowerEdge servers)
3.1 Test setup and results of the Discovery and Inventory feature in
OpenManage Enterprise 3.4
3.1.1 Recommendations for setting an environment to test the Discovery and
Inventory feature in OpenManage Enterprise 3.4
3.1.2 Test environment and results of the Discovery and Inventory feature in
OpenManage Enterprise 3.4
System configuration of devices used as Load for testing Discovery and Inventory feature
*Below system configurations were simulated and used for Discovery
Load Parameter
YX4X Server
YX3X Server
Model
PowerEdge R940
PowerEdge M630
Processor
4
2
iDRAC version
4.10.10.10
2.63.60.61
Physical Drives No
24
2
Protocols
Select only the protocols necessary for a specific discovery and inventory task
because selecting all the protocols causes the discovery and inventory task to run
slowly.
small ranges
For a faster discovery and inventory, it is recommended that the discovery jobs be split
into smaller ranges of 1000 IP addresses.
< 10,000 IPs
The IP ranges provided in the discovery task should not
exceed 10,000 IPs.
1 discovery
job at a time
For better performance, it is recommended to run one discovery job at a time if the
number of IP addresses in a single job is greater than 1000.