Users Guide

IQN, LUN ID, FCoE Target WWPN and so on that are not same across all targets and can cause a permanent non-
compliance of the baseline.
Remove a configuration compliance baseline
You can remove the configuration compliance level of devices associated with a configuration baseline. For field descriptions
displayed in the list, see Managing the device configuration compliance on page 83.
CAUTION: When you delete a compliance baseline, or delete device(s) from a compliance baseline:
● The compliance data of the baseline and/or device(s) is deleted from the OpenManage Enterprise data.
● If a device is removed, its configuration inventory is no longer retrieved, and the already retrieved
information is also deleted, unless the inventory is associated with an Inventory job.
A template used as a compliance baseline cannot be deleted if associated with a device. Appropriate messages are displayed in
such cases. Read through the error and event message displayed and act accordingly. For more information about error and
event messages, see the Error and Event Message Reference Guide available on the support site.
1. Click Configuration > Configuration Compliance.
2. From the list of configuration compliance baselines, select the corresponding check box, and then click Delete.
3. When prompted whether or not you want to delete, click YES.
The compliance baseline is deleted and the Overall Compliance Summary table of baselines is updated.
Related tasks
Create a configuration compliance baseline on page 86
Select a query criteria on page 41
Manage compliance baseline templates on page 84
Edit a configuration compliance baseline on page 87
Related information
Managing the device configuration compliance on page 83
88
Managing the device configuration compliance