Users Guide

6. Click Finish. Review the warning message and click YES.
A Device Configuration job is created under Jobs. See Using jobs for device control on page 101.
Clone templates
1. From the OpenManage Enterprise menu, under Configuration, click Templates.
A list of available templates is displayed.
2. Select the check box corresponding to the template you want to clone.
3. Click Clone.
4. Enter the name of new template, and then click Finish.
The cloned template is created and displayed in the list of templates.
Auto deployment of configuration on yet-to-be-
discovered servers or chassis
Existing configuration templates in the OpenManage Enterprise can be assigned to the servers and chassis which are awaiting
discovery. These configuration templates are automatically deployed on the respective devices when they are discovered and
onboarded.
To access the Auto Deploy page, click OpenManage Enterprise > Configuration > Auto Deploy.
The auto deploy targets and their respective Identifier (service tag or node IDs), template name, template type, status, and
Boot to Network ISO status (for servers) are displayed.
The Auto Deploy target list can be customized using the Advanced Filters fields available on the top of the list.
Section on the right side of the Auto Deploy page shows the Created On and Created By details of the selected auto
deployment target. When multiple items are selected, details of the last selected item is displayed in the section.
The following actions can be performed on the Auto Deploy page:
● Create templates for auto deployment. See Create auto deployment targets on page 67
● Delete templates that are not needed. SeeDelete auto deployment targets on page 68
● Export the auto deployment templates to different formats. See Export auto deployment target details to different formats
on page 68
Create auto deployment targets
NOTE:
To perform any tasks on OpenManage Enterprise, you must have necessary user privileges. See Role-based
OpenManage Enterprise user privileges on page 14
To create auto deployment targets :
1. Click OpenManage Enterprise > Configuration > Auto Deploy > Create
The Auto Deploy Template wizard is displayed.
2. On the Template Information page, select the template type (Server or Chassis).
3. From the Select Template drop-down menu, select an appropriate template. If the selected template has identity attributes
which are not associated with any virtual identity pool, the following message is displayed: The selected template has
identity attributes, but it has not been associated with a virtual identity pool. Deploying this template will not change virtual
network addresses on the target devices.
4. Click Next.
The Target Information page is displayed.
5. On the Target Information page, target devices can be selected in one of the following methods:
● Enter Manually : Enter the Service Tag or node IDs to identify the target devices. The identifiers can be entered in any
order, however, identifiers must be comma separated. Click Validate to verify the accuracy of the values. It is mandatory
to validate the identifiers.
Manage device configuration templates
67