Users Guide

○ The attributes with secure information, such as passwords, are hidden and would appear as 'empty' when
initially loaded and the changes to these secure attribute values are masked.
○ A template’s associated Identity pool cannot be changed if a profile is already associated to it.
3. Click Next.
In the Summary section, the attributes you edited by using the Guided and Advanced mode are displayed.
4. This section is read-only. Read through the settings and click Finish.
The updated template attributes are saved to the template.
Edit a chassis template
Editing chassis templates is possible with OpenManage Enterprise.
NOTE: To edit chassis templates you must have the privileges of an Administrator or a Device Manager. For more details,
see Role-based OpenManage Enterprise user privileges on page 14.
To edit a chassis template:
1. Select OpenManage Enterprise > Configuration > Templates to get the list of templates.
2. Select the check box corresponding to the required chassis template, and click Edit. Ensure that the template is identified as
"Custom".
3. Edit the Template Name and Description in the Template Information section. You cannot edit the Template Type.
4. Click Next.
5. In the Edit Components section under Advanced View, you can select or unselect the attributes to include or exclude in
the template.
6. Click Next .
7. You can review the changes to the attributes under Summary. A circle appears next to the changed attributes.
8. Click Finish to save the changes to the chassis template.
Edit IOA template
The attributes in the IOA template are uneditable. Only the name and description of an IOA template can be edited.
Edit network properties
On the Configuration > Templates page, you can edit the network configuration for the templates that contains applicable
NIC attributes. After selecting a template, click Edit Network to activate the Edit Network wizard and do the following:
1. Click IO Pool Assignment and from the Identity Pool list, select an identity pool for the template. Click Next.
2. In the Bandwidth section, edit the Minimum Bandwidth (%) and the Maximum Bandwidth (%) of the associated NICs
and click Next.
NOTE: Bandwidth settings are only applicable to the partitioned NICs.
3. In the VLANs section (applicable only for the modular systems):
a. Select an appropriate NIC Teaming option.
b. Select the Propagate VLAN settings immediately check box, to propagate the changed VLAN settings on the
associated modular-system servers immediately without the need for a server reboot. Click View Details to view the
devices that would be affected.
NOTE:
● Propagate VLAN settings immediately is implemented only if the template has been already deployed.
● Before propagating the VLAN settings, ensure that the network profiles are already created for the modular
system servers in the fabric.
64 Manage device configuration templates