Users Guide

While the invoke command is run, OpenManage Enterprise can start an SSH daemon. The external SSH client can attach with
OpenManage Enterprise for debugging purposes.
Disable FSD
After you invoke a debug capability on a console, it continues to operate until the console is restarted, or the debug capability is
stopped. Else, the duration determined from the start and end date exceeds.
1. To stop the debug capabilities, on the FSD Functions screen, select Disable Debug Capabilities.
2. On the Disable Invoked Debug Capabilities screen, select a debug capability or capabilities from a list of currently invoked
debug capabilities. From the lower right corner of the screen, select Disable.
Ensure that you stop any SSH daemon or SSH sessions that are currently using the debug capability.
Catalog Management field definitions
CATALOG NAME: Name of the catalog. Built-in catalogs cannot be edited.
DOWNLOAD: Indicates the download status of catalogs from its repository folder. Statuses are: Completed, Running, and
Failed.
REPOSITORY: Repository types such as Dell.com, CIFS, and NFS.
REPOSITORY LOCATION: Location where the catalogs are saved. Examples are Dell.com, CIFS, and NFS. Also, indicates the
completion status of a job running on the catalog.
CATALOG FILE: Type of catalog file.
RELEASE DATE: Date when the catalog file was created.
Firmware/driver compliance baseline reports—'false'
compliant devices
The firmware or driver compliance status of the following storage, networking, and hyper-converged infrastructure (HCI)
devices in the firmware/driver baseline compliance reports may show as compliant. However, you will not be able to select these
components in the compliance report as these are unsupported.
Table 33. Firmware/driver compliance baseline reports—'false' compliant devices
Device Category Device List
Storage
● SC Series
● MD Series
● ME Series
Network devices in the FX2, VRTX, and M1000e chassis
● F10 switches
● IOAs (Input/Output Aggregators)
● IOMs (Input/Output Modules)
Hyperconverged Appliances (HCI)
● VXRail
● XC Series
Devices updatable using individual device's Dell Update
Package (DUP) but not directly supported on Dell catalog
● MX9116n Fabric Engine
● MX5108n Ethernet Switch
● PowerEdge MX5000s
Devices that cannot be updated using the Dell catalog or the
individual DUP
NOTE: For firmware/driver update of these devices,
please refer the respective device's Installation Guide.
● MX7116n Fabric Expander Module
● PowerEdge MX 25GbE PTM
Other references and field descriptions 159