Users Guide

e. If you select RACADM, do the following:
i. In the Command Name box, enter the command name.
ii. In the Command box, type the commands. Up to 100 commands can be typed with each command required to be on
a new line.
iii. Click Finish
f. If you select IPMI Tool, do the following:
i. In the Command Name box, enter the command name.
ii. In the Command box, type the commands. Up to 100 commands can be typed with each command required to be on
a new line.
iii. Click Finish
3. To edit a remote command setting, select the command, and then click Edit.
4. To delete a remote command setting, select the command, and then click Delete.
OpenManage Mobile settings
OpenManage Mobile (OMM) is a systems management application that allows you to securely perform a subset of data center
monitoring and remediation tasks on one or more OpenManage Enterprise consoles and/or integrated Dell Remote Access
Controllers (iDRACs) by using your Android or iOS device. Using OMM you can:
● Receive alert notifications from OpenManage Enterprise.
● View the group, device, alert, and log information.
● Turn on, turn off, or restart a server.
By default, the push notifications are enabled for all alerts and critical alerts. This chapter provides information about the OMM
settings that you can configure by using OpenManage Enterprise. It also provides information required to troubleshoot OMM.
NOTE:
For information about installing and using OMM, see the OpenManage Mobile User’s Guide at Dell.com/
OpenManageManuals.
Related tasks
Enable or disable alert notifications for OpenManage Mobile on page 150
Enable or disable OpenManage Mobile subscribers on page 151
Delete an OpenManage Mobile subscriber on page 151
View the alert notification service status on page 152
Troubleshooting OpenManage Mobile on page 153
Related information
Enable or disable alert notifications for OpenManage Mobile on page 150
Enable or disable OpenManage Mobile subscribers on page 151
Troubleshooting OpenManage Mobile on page 153
Enable or disable alert notifications for OpenManage Mobile
By default, OpenManage Enterprise is configured to send alert notifications to the OpenManage Mobile application. However,
alert notifications are sent from OpenManage Enterprise only when a OpenManage Mobile user adds OpenManage Enterprise to
the OpenManage Mobile application.
NOTE: The administrator rights are required for enabling or disabling alert notifications for OpenManage Mobile.
NOTE: For OpenManage Enterprise to send alert notifications to OpenManage Mobile, ensure that the OpenManage
Enterprise server has outbound (HTTPS) Internet access.
To enable or disable alert notifications from OpenManage Enterprise to OpenManage Mobile:
1. Click OpenManage Enterprise > Application Settings > Mobile.
2. Select the Enable push notifications check box.
3. Click Apply.
150
Managing OpenManage Enterprise appliance settings