White Papers

Templates in OpenManage Enterprise
10 Advanced Server Configuration in Dell EMC OpenManage Enterprise 3.0
 If the port has been configured for boot (PXE, iSCSI, FCoE), it is displayed on the GUI. For FCoE
boot, you can configure attributes such as First FCoE WWPN target and boot LUN, and FCoE FCF
VLAN ID (for Intel).
 If an FC HBA is present and has been configured for FC boot in the template being edited, you can
configure the FC attributes such as First and second target WWPN and LUN ID.
 Storage specification—You can configure one or more virtual drive properties (with a name, size,
RAID level or layout, stripe size, read policy, and Write policy) and the selection of associated
physical drives (status, name, capacity, and media type).
The advanced edit provides you with a raw edit of the different attributes in an SCP file organized in a
hierarchical manner.
Edit template in OpenManage Enterprise—the Advanced view (This screen varies depending on
the template definition)