White Papers

Update firmware by using DUP in Dell EMC OpenManage Enterprise
22 Creating firmware baselines and catalogs by using Dell EMC OpenManage Enterprise
6 Update firmware by using DUP in Dell EMC OpenManage
Enterprise
Dell EMC OpenManage Enterprise enables you to manually select a DUP (Dell Update Package) from local
directory to apply on the device (s). Before applying, the DUP is validated for compliance-check and
signature-check. The feature displays information about the version being applied and provides details on the
criticality of the DUP.
1. On the Dell EMC OpenManage Enterprise page, click All Devices.
a. Select the device (s) from the list and click Update Firmware.
Select device to update the firmware version by using Dell EMC OpenManage Enterprise
b. Browse to the DUP location and upload the DUP file.
After the DUP is uploaded, it is validated and compliance-check is performed against the software
inventory of the device. Compliance report for the DUP is displayed as shown in the sample screen
shot here.
Update device firmware by using a DUP in Dell EMC OpenManage Enterprise
Note—By using a DUP, you cannot update or roll back the firmware version of Chassis Management Controller (CMC).