Release Notes

Description: The Console Update Execution job's status is displayed as 'Failed' on the Jobs page, if the appliance upgrade takes
more than 60 minutes. The 'Failed' status is due to a time out of the Console Update Execution job and can be ignored as this
has no functional impact on the upgrade process. [170688]
Issue 17
Description: The built-in Virtual Disk report contains duplicate or empty values if the virtual disks and physical disks don't have
any associations and are used individually. This issue is not observed if the VDs an PDs are being used together. [174851]
Resolution: It is recommended to use a custom report to get only the virtual disk data if the VDs and PDs are not associated.
Issue 18
Description: For Ubuntu devices, the OS Version under operating system information (from iDRAC/ISM) on the Device
Overview page is not displayed. [171103]
Issue 19
Description: With the Japanese version of the appliance, it is observed that the PDF export of the Warranty page contains
illegible characters. [176493]
Resolution: To get the PDF export of the Warranty page without the illegible characters, use the following workaround:
1. Export CSV report in Excel.
2. Change the encoding type to UTF-8.
3. Save it as PDF.
Issue 20
Description: When the appliance is configured to IPv6, it is unable to reach the targets like SMTP, syslog servers and share
through FQDNs which is resolvable to both IPv4 and IPv6. [153980]
Resolution: When the features that use FQDN fail, it is recommended to check the interface and use the corresponding IP. For
instance, if the primary network is enabled with only IPv6, and the FQDN expected to work on primary interface fails, user can
use IPv6 address in the place of FQDN as a workaround. This applies for secondary interface as well.
Issue 21
Description: Description: The Text User Interface (TUI) screen is not displayed until the 'Enter' key is pressed after updating
the appliance to version 3.4.1 on ESXi with large deployments involving 8,000 or more devices. [173206]
Issue 22
Description: When a Lead chassis retires and a backup chassis becomes the new lead on OpenManage Enterprise, the refresh
inventory marks the original backup chassis and its associated devices to be invisible and not shown in the UI. [161300]
Resolution: Discover the new Lead on OpenManage Enterprise.
Issue 23
Description: The rack physical groups with long names consisting of more than 150 characters with no spaces, the appliance
wizards experiences an 'overflow'. [164157]
Resolution: Limit the number of characters used to create names.
Issue 24
Description: If a Configuration Inventory task finds external identities that fall in an existing identity pool and that identity pool
is later deleted and a new one with the same or overlapping identities is created, the new identity pool will not show those
identities as assigned. [160888]
Issue 25
Description: Creation of templates using an MX7000 chassis that is configured to both IPv4 and IPv6 fails if the appliance is
configured to use only IPv6. [167525]
Resolution: Ensure that both the appliance and the MX7000 chassis are configured to use the same protocol(s).
Issue 26
Description: For the YX3X servers, few of the Subsystem Health section details, available on the individual device's Overview
page, such as the Storage, Temperature, and License details are displayed as 'No Data available,' even when their health status
is 'OK.' [155425]
Issue 27
Description: The 'From' address used for all email actions, such as Reports, Update, Discovery and Alert Policies, is dependent
on the SMTP server configuration. For some SMTP server configurations, the 'From' address is the Sender Email ID specified in
the Application settings (Application Settings > Console Preferences > Email Sender Settings > Sender Email ID) and
13