Release Notes

Description: An error 'Error getting identity pool information (CGEN1006)' is displayed when sorting is done on an identity
pool's Usage page fields. Also, the identity pool's Usage page turn blank when View By filter is applied. [200451]
Resolution: Return to the identity pool's Usage page after navigating to another page.
Issue 6
Description: Browser is unable to validate a Certificate Signing Request that is generated by providing IP address in the
Subject Alternate Name (SAN) field on the Certificates section of the Application Settings > Security page and shows 'Your
connection to this site is not secure' message. [204172]
Resolution: Provide a valid domain name in the SAN field and login with the appliance FQDN. The browsers will then be able to
validate the certificate and show connection as secure.
Issue 7
Description: The traps forwarded from one OpenManage Enterprise console to another OpenManage Enterprise console are
received as Miscellaneous category alerts with message "unknown trap received...," if the Trap Forwarding Format is set as
"Original Format" in the former console. [188953]
Issue 8
Description: If SNMPv3 destination(s) is/are already added as alert forwarding destination(s) in the appliance, then in order
to add and apply a new alert forwarding destination address, the appliance prompts only the first time to re-enter of all the
previously entered SNMPv3 Authentication and Privacy passphrases before proceeding. [190690]
Resolution: Regardless of the appliance prompt, you must re-enter all the previously entered SNMPv3 Authentication and
Privacy passphrases every time the SNMP community string or port is edited on Application Settings > Alerts > SNMP Alert
Forwarding Configuration.
Issue 9
Description: For the discovered C9010 network switches, the Model field on the 'All Devices' and the 'Device Details' page is
displayed as 'Unknown.' [188383]
Issue 10
Description: When a C9010 network switch is rebooted or reloaded, the alerts received in the appliance are being categorized
as Miscellaneous with message 'Unknown trap received with enterprise OID...' [188382]
Issue 11
Description: When a Z9264 network switch is rebooted or reloaded, the alerts received in the appliance are being categorized
as Miscellaneous with message 'Unknown trap received with enterprise OID....' [ 194718]
Issue 12
Description: Post addition of the disk space using the Configure Appliance Disk Size feature in the Text User Interface (TUI) ,
deletion or reduction of the appliance's console expanded disk space is not supported . [192976]
Resolution: To remove a newly-added disk or to reverse the increase in size of an existing disk, you must revert to prior VM
snapshot that you are recommended to take as a backup before applying any disk configuration changes.
Issue 13
Description: For a logged-in AD user belonging to an imported child AD group, it is observed that multiple roles such as Device
Manager and Viewer are displayed upon a mouseover on the username on the appliance masthead right-hand corner. This
happens if the parent directory group and child directory group are imported with different privileges. For such AD users, the
role with the maximum privilege will be applied. [195183]
Issue 14
Description: Console upgrade fails from version 3.4.1 to version 3.6, if there are a large number (more than 2,000) unreachable
devices, in multiple discovery settings, in OpenManage Enterprise version 3.4.1. This happens as the long runtime of Discovery
task exceeds the maximum wait-time limit of 48 hours set for the initiation of other post-upgrade tasks. [201178]
Resolution: To prevent upgrade failure, in such rare scenarios, you can manually cancel the Discovery task to allow the
post-upgrade tasks to initiate and finish normally.
Issue 15
Description: An invalid audit log indicating 'console upgrade failure' is generated upon a successful upgrade of the appliance
from version 3.4 to version 3.5. This audit log can be ignored. [173311]
Issue 16
12