Dell EMC OpenManage Enterprise Version 3.7 Release Notes July 2021 Rev.
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2017 - 2021 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents Chapter 1: .................................................................................................................................... 4 Dell EMC OpenManage Enterprise Version 3.7 Release Notes................................................................................ 4 Release type and definition......................................................................................................................................... 4 What is supported..................................
1 Topics: • Dell EMC OpenManage Enterprise Version 3.7 Release Notes Dell EMC OpenManage Enterprise Version 3.7 Release Notes This document describes the new features, enhancements, known issues, and fixed issues in Dell EMC OpenManage Enterprise version 3.7. Release type and definition Dell EMC OpenManage Enterprise OpenManage Enterprise is a systems management and monitoring web application delivered as a virtual appliance.
New in this release ● CloudIQ plugin support — Device group(s) can be selected to send data to CloudIQ for monitoring. Enhancements ● Ability to view devices that have been disconnected due to Authentication failure from All-Devices page. ● Text User Interface (TUI) capabilities to selectively enable or disable debug logging for appliance and plugin services. Limitations ● Only the OpenSSH is supported for the discovery and inventory collection of Windows-based servers and Hyper-Vs.
Description: When a 'scoped' device manager uses Global Search, the total search count exceeds the actual items displayed. [197629] Issue 5: Run Inventory on Group is unavailable for Device Manager users. Description: For the Device Manager users, Run Inventory on Group option under Inventory on the All Devices page is unavailable. [193441] Discovery and inventory Issue 1: Chassis Health State shows as disconnected for 10 minutes after the chassis administrator password is reset.
Issue 13: Windows Hyper-V guest information is missing when correlated with iDRAC during MX7000 discovery. Description: The correlation of Windows Hyper-V post MX7000 chassis CCD, fails to give the Guest VM information under Device details page. [167935] Resolution: The sled discovery need to be done out of the MX7000 chassis and managed separately to view the guest details. Issue 14: Incorrect managed state is displayed for MX7000 chassis when discovered using lower privileged credentials.
Description: After upgrading to the latest version of OpenManage Enterprise, the existing job IDs are changed. [108055] Issue 4 Description: Configuration > VLANs page does not update automatically after importing VLAN definitions from file or from chassis. [153611] Resolution: Refresh the Configuration > VLANs page or navigate to another page and return to view the newly-imported VLAN definitions.
Resolution: Windows (64-bit) driver updates for R6525 AMD chipsets must be done manually outside of the appliance. Issue 11 Description: The firmware update task using the HTTP and HTTPS local shares fails, if these local shares were configured using proxy settings and are not listed in the proxy exception list.
Description: Attempt to redeploy a profile to a new target, after the profile is unassigned from its earlier target, fails with a 'CGEN6008 -Unable to process the request......' error. This error is exhibited even when the previous and new target are identical to each other. [204655] Issue 6 Description: Deployment of a second template on a chassis is allowed even when a profile is already deployed on it.
Description: After a chassis is removed from the MCM group, you must rediscover the lead and member chassis to create and deploy a configuration template. Issue 21 Description: The Migration Profile task fails if the user is not configured on the target device with the error: 'User Name is not configured '. [107376] Issue 22 Description: If the IP configuration of a discovered device is changed during template deployment (from DHCP to Static or vice versa), the Boot to Network ISO operation fails.
Description: An error 'Error getting identity pool information (CGEN1006)' is displayed when sorting is done on an identity pool's Usage page fields. Also, the identity pool's Usage page turn blank when View By filter is applied. [200451] Resolution: Return to the identity pool's Usage page after navigating to another page.
Description: The Console Update Execution job's status is displayed as 'Failed' on the Jobs page, if the appliance upgrade takes more than 60 minutes. The 'Failed' status is due to a time out of the Console Update Execution job and can be ignored as this has no functional impact on the upgrade process. [170688] Issue 17 Description: The built-in Virtual Disk report contains duplicate or empty values if the virtual disks and physical disks don't have any associations and are used individually.
for others it is the username used for SMTP server authentication (Application Settings > Alerts > Email Configuration > SMTP Server Network Address). [164204] Issue 28 Description: There is currently a discrepancy between the actual number of MIBs imported and the MIB count displayed on the Monitor > MIB page.
Resolution: OpenManage Enterprise includes CentOS kernel patches for the TCP SACK Panic issues and carries the updated kernel-3.10.0-957.21.3.el7.x86_64.rpm including fixes for the CVE-2019-11477 vulnerability. Issue 40 Description: Post console update Time interval should be enabled manually in alert policy as it is disabled by default. Issue 41 Description: Alert policies have been recategorized since OpenManage Enterprise version 3.3.1. The alert policies from appliance versions before 3.3.
Description: Console Upgrade from 3.0 through NFS Share fails. Also, console Upgrade through HTTPS (internal Share) fails when upgrading from versions 3.0 and 3.1. [114683] Resolution: Use the online method for updating, or use the HTTPS method. Ensure that the security certificates are signed by a trusted third-party certificate authority while using the HTTPS method of update.
Issue 67 Description: Deleting a device from the All Devices page would fail if there are active jobs involving the device. Resolution: Before deleting a device from the All Devices page, ensure there are no jobs in the 'running' status involving the device. Installation Dell EMC OpenManage Enterprise is provided as an appliance that you can deploy on a hypervisor and manage resources to minimize downtime.
Table 2. Minimum system requirements (continued) Particulars Minimum requirements User interface HTML 5, JS based NOTE: For the latest update about the minimum system requirements for OpenManage Enterprise, see the Dell EMC OpenManage Enterprise Support Matrix on the support site. Generic naming convention for Dell EMC PowerEdge servers To cover a range of server models, the PowerEdge servers are now being referred to using the generic naming convention and not their generation.
