Users Guide

corresponding color band on the Donut chart. The data in the table changes. For more information about using the Donut
chart, see Donut chart.
All Devices page — device list actions
On the All Devices page (OpenManage Enterprise > Devices) devices list, you can perform various device actions.
The action buttons are context sensitive to both the group selection from the tree on the left and also for the devices selected
in the grid. So if the action is group related, for example group actions such as 'Run Inventory on Group' roup and 'Refresh
Health on Group' — will default to the selected group. All device actions will default to the selected devices. However, few
actions such as Discovery are always applicable without any selection. Also, the type of actions available per device depend on
the type of device selected.
NOTE: To perform any tasks on OpenManage Enterprise, you must have necessary role-based user privileges and scope-
based operational access to the devices. See Role and scope based access control in OpenManage Enterprise on page 15.
● From Group Actions drop-down, you can:
○ Create custom device groups. See Create a custom group (Static or Query) on page 54.
○ Create static groups. See Create a Static device group on page 54.
○ Create query groups. See Create a Query device group on page 55
○ Edit static or query groups. See Edit a static group on page 56 and Edit a query group on page 56.
○ Clone groups. See Clone a static or query group on page 57.
○ Rename group. See Rename a static or query group on page 56.
○ Delete groups. See Delete a static or query device group on page 56.
○ Add device(s) to a new group. See Add devices to a new group on page 57.
○ Add device(s) to an existing group. See Add devices to existing group on page 57.
● From Discovery drop-down, you can:
○ Discover and onboard devices. See Discovering devices for monitoring or management on page 39 and Onboarding
devices on page 43.
○ Exclude devices. See Exclude devices from OpenManage Enterprise on page 60.
○ Edit Exclude ranges. See Global exclusion of ranges on page 46.
● From Inventory drop-down, you can:
○ Run inventory on a device group. See Create and run an inventory job.
○ Run inventory on devices. See Run inventory on devices on page 60.
● From Refresh Health drop-down, you can:
○ Refresh health on group. See Refresh health on group on page 58.
○ Refresh health on devices. See Refresh health on devices on page 62.
● From More Actions drop-down, you can:
○ Turn LED on. See Create a job to turn device LEDs on page 127.
○ Turn LED off. See Create a job to turn device LEDs on page 127.
○ Power on the device(s). See Create a job for managing power devices on page 127.
○ Power off the device(s). See Create a job for managing power devices on page 127.
○ Graceful shutdown of the device(s). See Create a job for managing power devices on page 127.
○ Power Cycle a system (Cold Boot). See Create a job for managing power devices on page 127.
○ System reset (Warm Boot). See Create a job for managing power devices on page 127.
○ Perform IPMI CLI remote command on a device. See Run remote–RACADM and IPMI–commands on individual devices
on page 67.
○ Perform RACADM CLI remote command on a device. See Run remote–RACADM and IPMI–commands on individual
devices on page 67.
○ Delete device(s) from OpenManage Enterprise. See Delete devices from OpenManage Enterprise on page 60.
○ Export data on all the devices. See Export all or selected data on page 63
○ Export data on the selected devices. See Export all or selected data on page 63
Manage devices and device groups
59