Release Notes

Description: Post upgrade of OpenManage Enterprise to version 3.6, the alert policies from the previous appliance versions
such as version 3.4 and version 3.5 are only assigned to the administrator users. Hence, the alert policies created by device
managers prior to the upgrade would need to be recreated. [194142]
Issue 3
Description: Post upgrade of OpenManage Enterprise to version 3.6, the firmware baselines created by the 'local' device
manager users from the previous appliance versions such as version 3.4 and version 3.5 are only assigned to the administrator
users. Hence, the firmware baselines created by device managers prior to the upgrade would need to be recreated. [194142]
Issue 4
Description: VLAN operation on in-scope 'proxied' MX7000 sleds is allowed for a device manager, even if the MX7000 chassis
is out of scope. [192774]
Resolution: As the operations for the proxied sleds are routed through chassis, as a best practice the admin must assign both
the chassis and the sleds in a device manager's scope.
Issue 5
Description: When a 'scoped' device manager uses Global Search, the total search count exceeds the actual items displayed.
[197629]
Issue 6
Description: For the Device Manager users, Run Inventory on Group option under Inventory on the All Devices page is
unavailable. [193441]
Issue7
Description: Post upgrade of OpenManage Enterprise to version 3.6, the OpenManage Mobile subscriptions added by the
Administrator from the previous appliance versions such as version 3.4 and 3.5 are viewable by the Device Manager users.
[192089]
Discovery and inventory
Issue 1
Description: When the Administrator password is reset on any discovered chassis (MX7000, M1000e, VRTX,and FX2), there is
a disconnection of the chassis with the appliance for 600 seconds. During this interval, the Health State of the chassis on the All
Devices page is displayed as 'Disconnected' and the tasks initiated on the chassis and sleds fail. [198434]
Issue 2
Description: Post deletion of 8,000 devices from the appliance, the automatic onboarding task fails during the next discovery
cycle. [200458]
Resolution: Restart the services from the Text User Interface (TUI) page.
Issue 3
Description: The RaidControllerId attribute in the ServerRaidControllers component in OpenManage Enterprise inventory and
CIQ device data inventory have different values for the same device. [185745]
Issue 4
Description: The MX7000 I/O Modules(IOMs) discovered in OpenManage Enterprise version 3.4 might not be displayed on the
All Devices page post upgrade. [179763]
Resolution: Rediscover the MX7000 chassis, post an appliance upgrade from version 3.4.
Issue 5
Description: For third party devices such as the HPE Proliant servers, you might see duplicate entries if they are discovered
using multiple protocols. This duplication can be corrected by deleting the entries and rediscovering the device(s) using only the
IPMI protocol. [180572]
Issue 6
Description: For the discovered HP servers, the devices' Hardware Logs are not displayed as the third party library used by the
appliance is unable to extract the hardware logs for HP iLO servers. [170550]
Issue 7
6