Users Guide

Table 15. Network types (continued)
Network types Description
Storage - FCoE Used for FCoE VLANs
Storage - Data Replication Used for VLANs supporting storage data replication such as
for VMware Virtual Storage Area Network (VSAN)
VM Migration Used for VLANs supporting vMotion and similar technologies
VMWare FT Logging Used for VLANs supporting VMware Fault Tolerance
Edit or delete a configured network
1. Go to the VLANs page by clicking Configuration > VLANs.
2. Select a network from the list, and then click Edit in the right pane to change the name, description, VLAN ID, or the
network type.
NOTE: VLAN configuration on M1000e and FX2 chassis is not supported in an IPv6 infra, as the IPv6 addressing is not
supported by M I/O Aggregator (IOA) and FN I/O modules.
NOTE: The changed VLAN name and IDs are not updated on the target MX7000 chassis after a stateless deployment
task is run.
3. To delete the network, select the network and click Delete.
4. Click Yes.
Export VLAN definitions
The network definitions available in OpenManage Enterprise can downloaded either as a CSV or as a JASON file.
1. To download as a CSV file :
a. Click Configuration > VLANs > Export and select Export All as CSV.
2. To download as a JSON file :
a. Click Configuration > VLANs > Export and select Export All as JSON.
Import network definitions
The following options are available to import the network definitions:
1. Import VLAN definitions from a file
To import VLAN definitions from a file:
a. Click Configuration > VLANs.
b. Click Import and select Import from File.
c. Navigate to the file location and select an existing .json or .csv file containing the VLAN definitions, and click Open.
NOTE:
● Invalid entries or content type in the files are flagged and are not imported.
● VLAN definitions in the .csv and .json file(s) must be entered in the following formats:
Table 16. VLAN definition format for CSV file
Name Description VLANMin VLANMax Type
VLAN1 VLAN with single ID 1 1 1
96 Manage device deployment templates