Users Guide

Number of FCoE
Identities
Select the required number of FCoE identities. The identities can be between 1 and 5000.
Actions
Previous Displays the iSCSI tab.
Next Displays the Fibre Channel tab.
Finish Saves the changes and displays the Identity Pools page.
Cancel Closes the Create Identity Pool wizard without saving the changes.
Create Identity Pool - Ethernet
In the Ethernet tab, you can add the required number of MAC addresses to the identity pool.
Include ethernet
virtual MAC
addresses
Select the check box to add the virtual MAC addresses to the identity pool.
Starting virtual
MAC Address
Enter the starting virtual MAC address in one of the following formats:
● AA:BB:CC:DD:EE:FF
● AA-BB-CC-DD-EE-FF
● AABB.CCDD.EEFF
The maximum length of a MAC address is 50 characters. This option is displayed only if the Include
ethernet virtual MAC addresses check box is selected.
Number of virtual
MAC Identities
Select the number of virtual MAC identities. The identities can be 1 to 50. This option is displayed only if
the Include ethernet virtual MAC addresses check box is selected.
Actions
Previous
Displays the Pool Information tab.
Next Displays the iSCSI tab.
Finish Saves the changes and displays the Identity Pools page.
Cancel Closes the Create Identity Pool wizard without saving the changes.
View definitions of identity pools
To view the definitions of an identity pool:
1. On the Configuration page, click Identity Pools.
2. Select an identity pool, and then click Summary.
The various identity definitions of the identity pool are listed.
3. To view the usage of these identity definitions, click the Usage tab and select the View By filter option.
Edit identity pools
You can edit an identity pool to add ranges that you had not specified earlier, add an identity type, or delete identity type ranges.
To edit the definitions of an identity pool:
1. On the Configuration page, click Identity Pools.
94
Manage device deployment templates