White Papers

6 Chassis, Sled, and IOA Template Cloning using Dell EMC OpenManage Enterprise version 3.2 | Document ID
2 Clone Chassis and Server configurations with VLAN for
MX7000
Cloning of a complete MX7000 chassis configuration is demonstrated with various use cases - each use case
corresponds to a specific chassis configuration.
2.1 USE CASE 1
The requirement is to clone the chassis and the server configurations of an existing, fully-configured MX7000
chassis (represented as the Reference Setup) to one or more newly-added MX7000 chassis having the exact
hardware configuration.
Note: This whitepaper is written with an assumption that the current OME appliance is not used for the
Reference Setup configuration.
2.1.1 Chassis Configuration
You have an MX7000 chassis containing two sleds and two IOMs fully configured by OpenManage Enterprise
(represented as the Reference Setup). The newly procured MX7000 chassis must have the same number of
sleds and IOMs.
Note: The newly procured chassis must have the sleds placed in the exact same slots as the reference chassis.
MX7000e Template Cloning – Usecase 1