White Papers

5 Chassis, Sled, and IOA Template Cloning using Dell EMC OpenManage Enterprise version 3.2 | Document ID
1 Requirements
To perform template capture and deploy operation, the following requirements must be met:
➢ Deploying device configuration requires the OpenManage Enterprise Advanced license on target servers (not
available for chassis). The license is not required for creating device configuration template from a server.
➢ For the PowerEdge servers with iDRAC version lesser than 2.52.52.52 (only up to 2.50.50.50) and the M1000e
chassis, SMBv1 should be enabled on the OpenManage Enterprise appliance for creation or deployment of
template. For instructions on enabling SMBv1, refer the Openmanage Enterprise documentation .
➢ Complete chassis discovery should be performed. (To discover the IO modules in chassis, you must enable the
IO modules in the “Advanced Option” during chassis discovery. For more information, refer OpenManage
Enterprise 3.2 User’s Guide, topic: Create customized device discovery job protocol for servers – additional
settings for discovery protocol.)