White Papers

35 Chassis, Sled, and IOA Template Cloning using Dell EMC OpenManage Enterprise version 3.2 | Document ID
II. Deploy the Sled Template on the new Sled
1. Navigate to Configuration > Deploy tab.
2. Select the created Sled template. Click on Deploy Template.
3. Select the new Sled as target device. Click Next.
NOTE: The target device selected is the M640 sled in Slot1 and Slot2 populated in one or more newly procured
M1000e chassis.
4. The Boot to Network ISO allows you to install the specified OS post deployment.
i. Select the Share type as CIFS/ NFS.
ii. Provide the path to the OS image in the ISO path input box in “/OS-Images/OS-file.iso” format.
iii. Provide the Share IP address and Credentials that can be accessed from OM Enterprise console.
iv. Click Next.
v. The IDRAC IP setting can be changed to DHCP or Static in the IDRAC Management IP Option.
o If you wish to set static IP for the devices selected for deployment, select the Set static IP for
each device options and provide the Management IP for each device.
vi. Select the option Run Now if you wish to run the job immediately or deployment can be scheduled.
Deploy the M640 Template -copy to Slot 3 and Slot 4 of the newly procured chassis using the below steps:
1. Navigate to Configuration > Deploy tab.
2. Select the M640 Template-copy. Click on Deploy Template.