White Papers

23 Chassis, Sled, and IOA Template Cloning using Dell EMC OpenManage Enterprise version 3.2 | Document ID
3.1.3 Associate VLAN pool to the server configuration Template
VLAN association is a critical step in the server template cloning.
It is mandatory that the VLAN ID deployed on the Reference setup matches with the VLAN ID associated to the
newly created template.
This white paper is written with an assumption that the VLAN settings on Reference Chassis was done outside of
the current OME appliance. VLAN pool can be re-used in case the same was already created in the OME appliance.
This section, can be skipped only if IOA deployment (discussed in Creating and Deploying IOA Template) is
forecasted on the respective IOAs present in the chassis.
Note: Before going to the next step, record the details of the VLAN ID created and mapped to Tagged and
Untagged port, on the Reference setup IOA server facing port. Keep the details handy for the creation of the
VLAN pool.
I. Create VLAN pool in OM Enterprise according to the reference configuration
in M1000e setup
• The M640 Sled is deployed with VLAN 100 (Tagged) in Integrated NIC port 1 mapped to Fabric A1 and VLAN
200 (Untagged) in Integrated NIC port 2 mapped to Fabric A2.
Create two VLAN pool with ID 100 and 200 using below steps:
1. Navigate to Configuration > Networks
2. Select Define and add in the Name, Description, VLAN ID and Network type.
NOTE: The VLAN ID created should be a replica of that present in the reference setup