White Papers

18 Chassis, Sled, and IOA Template Cloning using Dell EMC OpenManage Enterprise version 3.2 | Document ID
II. Deploy the Sled Template on the new Sled
Deploy the MX840c Template to Slot 1 and Slot 3 of newly procured chassis using the below steps:
1. Navigate to Configuration > Deploy tab.
2. Select the MX840c template. Deploy Template
3. Select the new Sled as target device. Click Next.
NOTE: The target device selected is the MX840c sled in Slot1 and Slot3 in one or more newly procured MX7000
chassis.
4. The Boot to Network ISO allows you to install the specified OS post deployment.
i. Select the Share type as CIFS/ NFS.
ii. Provide the path to the OS image in the ISO path input box in “/OS-Images/OS-file.iso” format.
iii. Provide the Share IP address and Credentials that can be accessed from OM Enterprise console.
iv. Click Next.
5. The IDRAC IP setting can be changed to DHCP or Static in the IDRAC Management IP Option.
o If you wish to set static IP for the devices selected for deployment, select the Set static IP for
each device options and provide the Management IP for each device.
Deploy the MX840c Template -copy to Slot 5 and Slot 7 of newly procured chassis using the below steps:
1. Navigate to Configuration > Deploy tab.
2. Select the MX840c Template-copy. Deploy Template.
3. Select the new Sled as target device. Click Next.