Users Guide

This script modifies the openmanage_enterprise.x86_64-0.0.1.ovf file for deployment in accordance with the
values set in the ovf_properties.config file. When the script finishes execution, a sample ovftool command is displayed. It
contains tags such as <DATASTORE>, <user>, <password>, <IP address>, and so on, that you must replace as
per your deployment environment. These settings define the resources that are used on the target ESXi system and also the
credentials and IP address of the target system.
NOTE: Remember to replace the entire tag including the < and > symbols.
4. Run the modified ovftool command from the previous step.
NOTE: The ovftool command must be run with the --X:injectOvfEnv and --powerOn flags because they are required for
programmatic deployment.
After the ovftool command is run, the manifest validates and the deployment begins.
Install OpenManage Enterprise 23