White Papers

Other Policy Actions
24 Static Power and Temperature-Triggered Policies with OpenManage Enterprise Power Manager
3. In OpenManage Enterprise, click Devices > Device Name > Power Management and Monitoring >
Policies and EPR.
All the policies applied to the device are displayed with the corresponding details.
To view all the policies created for a group, click Devices > Group Name > Group Details >
Policies and EPR.
The policies applied to the group are displayed with the corresponding details.
5.2 Edit Policy
You can modify existing power or Temperature-Triggered policies based on the change in power consumption
history or average temperature generated by the devices or groups.
Consider the following before editing a policy:
• You cannot modify the type of policy after creation.
• You cannot modify the device or group selection after creation.
To edit a policy, perform the following steps:
1. From OpenManage Enterprise, navigate to Power Management > Policies.
2. Select a policy and click Edit.
3. Modify the attributes through the Policy wizard and click Finish.
5.3 Disable Policy
Remove the limit applied on power consumption or the average inlet temperature generated by a device or
group by disabling the policy. Disable a policy either from Power Management > Policies tab or from Edit
Policy wizard.
From OpenManage Enterprise, click Power Management > Policies. The Policies tab is displayed.
1. Select the policy and click Disable. In the confirmation window, click Yes.
OR
Select the policy and click Edit. The Edit Policy wizard is displayed.
a. In General section, clear the Enable check-box and click Finish from the Summary section.
The policy is disabled successfully.