Users Guide
Table Of Contents
- Dell EMC OpenManage Enterprise Power Manager Version 2.0 User’s Guide
- Contents
- Introduction to Power Manager
- Revision history
- What is new in this release
- Compatibility matrix
- License requirements
- Scalability and performance
- Getting started with Power Manager
- Create a device discovery job
- Monitor and manage Power Manager devices
- Rack management
- Manage data center during power reduction
- Quick access to Power Manager data
- View power and thermal history of Power Manager groups
- View top five energy consumers
- View ratio of devices discovered in OpenManage Enterprise to devices added in Power Manager
- View top ten power offenders
- View top ten temperature offenders
- View top ten underutilized racks for power and space
- View power and space headroom
- Maintain Power Manager
- Alerts
- Reports in Power Manager
- Update Power Manager
- Frequently Asked Questions
- Troubleshooting
- Appendix
- Other information you may need
Delete policy
Delete policies that are no longer required.
About this task
NOTE: If you are logging in as a Device Manager, only the device groups and devices that are in your scope are available for
viewing and management.
For example, if you are logging in as a Device Manager DM1 user, you can delete only the policies that are created by the Device
Manager DM1 user.
When an active policy is deleted, any power consumption restrictions or temperature thresholds that are applied by the policy
are also deleted.
NOTE: If you delete an active temperature-triggered policy, the Emergency Power Reduction (EPR) is automatically
removed from the group.
To delete a policy, perform the following steps:
Steps
1. Launch OpenManage Enterprise, and then click Plugins > Power Management > Policies.
The Policies tab is displayed.
2. Select a policy that you want to delete, and click Delete.
3. In the confirmation window, click Yes.
The policy is deleted successfully.
Managing unmonitored devices
View details of Unmonitored Devices
About this task
NOTE:
If you are logging in as a Device Manager, only the device groups and devices that are in your scope are available for
viewing and management.
For example, if you are logging in as a Device Manager DM1 user, you can view the unmonitored devices that are part of the
group in your scope.
To view the details of the devices, perform the following steps:
Steps
1. Launch OpenManage Enterprise, and then click Plugins > Power Management > Power Manager Devices.
The Power Manager Devices tab is displayed.
2. Click UNMONITORED > Unmonitored Devices.
All the Unmonitored Devices details are listed on the Unmonitored Devices tab.
After adding the unmonitored devices in a physical group under a rack, the location and rack slot columns are populated for
this device.
Edit Unmonitored Devices details
About this task
NOTE:
If you are logging in as a Device Manager, only the device groups and devices that are in your scope are available for
viewing and management.
For example, if you are logging in as a Device Manager DM1 user, you can only view and cannot edit the unmonitored devices
information that is part of the group in Device Manager DM1 user scope.
Maintain Power Manager
65