Users Guide

4. Select the rack and click Move.
The device is moved to the new rack.
Remove device from rack
About this task
NOTE: If you are logging in as a Device Manager, only the device groups and devices that are in your scope are available for
viewing and management.
For example, if you are logging in as a Device Manager user, you can delete the devices from the physical groups that are
assigned to you from the Indiviual Devices tab. However, after removing the device from Power Manager, you cannot re-add
the device to Power Manager when logged in as a Device Manager user.
To remove a device from the rack, perform the following steps:
Steps
1. Launch OpenManage Enterprise and perform one of the following steps:
a. On the Devices page, in the left pane, expand the PLUGIN GROUPS section.
b. To view the devices, expand the Physical Hierarchy group until a rack level and right-click and select the Manage
Rack option.
The Manage Rack page is displayed.
Or
a. Launch OpenManage Enterprise, and then click Plugins > Power Management > Rack View.
The Rack View page is displayed.
Optional: To filter and view the data, expand the Advanced Filters option. Following is a list of categories available:
● Group Name
● Health State
● Power State
● Connection State
● Type
Select the categories of your choice and view the filtered data.
b. Click the rack name.
The Manage Rack page is displayed.
2. Select the devices and click Remove Device(s) From Rack.
3. In the confirmation page, click Yes.
The devices are removed from the rack.
Maintain alert thresholds
View alert thresholds
View the status of the device or group that is based on the configured alert thresholds.
Prerequisites
Ensure that you have added devices or groups to Power Manager.
About this task
NOTE:
If you are logging in as a Device Manager, only the device groups and devices that are in your scope are available for
viewing and management.
Maintain Power Manager 59