Users Guide

The following filters are displayed for the Individual Devices tab:
● Health State
● Power State
● Connection State
● Name
● Identifier
● Model
● Type
● Managed State
The following filters are displayed for the All Monitored Devices tab:
● Health State
● Power State
● Connection State
● Name
● Identifier
● Model
● Type
● Managed State
● Part of Group
For information about each filter, see the Appendix.
5. Optional: To clear the filters, click Clear All Filters.
6. Optional: To sort any column alphabetically, click the column name so that an arrow is displayed with the column name.
Remove devices
To stop monitoring the devices, remove them from Power Manager.
Prerequisites
Ensure that the following prerequisite is met:
● The Emergency Power Reduction (EPR) is not enabled on the device.
About this task
NOTE:
If a device is removed in OpenManage Enterprise, then that device is automatically removed from Power
Manager.
NOTE: When a device is added individually and as part of a group to Power Manager, ensure that all the instances of the
device are removed from Power Manager to stop monitoring the devices.
For example, if you are logging in as a Device Manager user, you can delete the devices from the physical groups that are
assigned to you from the Indiviual Devices tab. However, after removing the device from Power Manager, you cannot re-add
the device to Power Manager when logged in as a Device Manager user.
To remove a device, perform the following steps:
Steps
1. Launch OpenManage Enterprise, and then click Plugins > Power Management > Power Manager Devices.
The Power Manager Devices tab is displayed.
2. Click the Individual Devices tab.
The Individual Devices tab is displayed.
3. Select the devices that you want to remove and click Remove Device(s).
The Remove Device confirmation window is displayed.
4. To confirm removal, click Remove.
The devices are removed from Power Manager.
Maintain Power Manager
53