Users Guide

● Health State
● Power State
● Connection State
● Type
Select the categories of your choice and view the filtered data.
b. Click the rack name.
The Manage Rack page is displayed.
2. To add devices discovered in OpenManage Enterprise, click Add To Rack Slot.
The Add Device(s) To Rack Slots wizard is displayed.
3. In the Select Device(s) section, select the devices and click Next.
4. Optional: To filter and view the data, perform the following steps:
a. Click Advanced Filters.
b. Select your category of filters.
The following filters are displayed for devices:
● Health State
● Power State
● Connection State
● Name
● Size of Device (U)
● Identifier
● Model
● Type
● Managed State
5. In Add device(s) to rack slots, by default, the devices are automatically added in the available slots in the rack. To add a
device at a specific slot, select the Auto drop-down menu and select the required slot.
6. Click Finish.
The devices that are added are graphically displayed on the Manage Rack page.
NOTE: The rack slot option is available for a chassis, rack servers, storage, network switches, and unmonitored devices.
To view details of modular servers inside a chassis and details of the connected Input Output Modules (IOM), locate the
chassis in the Manage Rack page and hover the pointer at the IP address or device name.
Create physical groups through CSV file
Use the import feature to create physical groups and add devices to rack slots in Power Manager by importing new or existing
physical group details through a CSV file, instead of manually creating the physical groups with hierarchies.
About this task
Consider the following points before creating and importing the CSV file:
● Only Administrators can import the CSV files.
● The script checks if the devices are discovered in OpenManage Enterprise.
● Ensure that the physical group you are creating adheres to the hierarchy as follows:
Table 20. Supported hierarchy format
Physical group Supported hierarchies
Data Center Room, Aisle, Rack
Room Aisle, Rack
Aisle Rack
Rack Not applicable
● When creating a rack in physical group, ensure that you provide the rack name, power capacity, and space capacity.
● Each physical group and their siblings in a physical group hierarchy are identified by a unique name.
● To add a device in the physical group:
Rack management
41