Users Guide

2. To add the Unmonitored Devices, click Add.
The Add Unmonitored Devices page is displayed.
3. Provide the device details and click Finish.
For information about each field, see the following table.
Table 17. Details for Unmonitored Devices
Field Description Mandatory Value Ranges
Device Name Provide a unique device
name.
Yes Combination of characters,
special characters, and
numbers.
Limit: 1-255 characters
Description Provide brief information
about the device you are
adding.
No Combination of characters,
special characters, and
numbers.
Limit: 0-255 characters
Hostname Provide a hostname. No Combination of characters,
special characters, and
numbers.
Limit: 1-255 characters
Identifier Provide a unique identifier
for the device.
Yes Combination of characters,
special characters, and
numbers.
Limit: 1-255 characters
Model Provide the model name. No Combination of characters,
special characters, and
numbers.
Limit: 0-255 characters
Size of Device (U) Provide the space occupied
on the rack.
Yes Numbers only
Limit: 1-80
Estimated Max Power (W) Provide the defined
maximum power that the
device can consume.
No Numbers only
Limit: 1–629365631
Add or edit device details for Power Manager
monitored devices
Add device details for devices monitored through Power Manager for accurate rack management.
About this task
NOTE:
If you are logging in as a Device Manager, only the device groups and devices that are in your scope are available for
viewing and management.
For example, if you are logging in as a Device Manager DM1 user, you can view and edit the device details that are part of
groups that are in Device Manager DM1 user scope. However, as a Device Manager DM1 user, you cannot add any device to the
group in your scope.
To add or edit the device details, perform the following steps:
38
Rack management