API Guide

]
}
Output:
{
"Id": 30
}
Table 52. Attributes
Attribute name Description
Id ID of the power policy
Name Name associated with the policy.
Description Description associated with the policy
Enabled Indicates if the policy is enabled or disabled.
Schedule Indicates when the policy is enabled
StartTime Time at which the policy interval starts.
EndTime Time at which the policy interval ends.
StartDate Date from which the policy is active.
EndDate Date until which the policy is active.
DaysOfTheWeek Days of week in which the policy is active.
Targets Target device or group of the policy.
Id ID of the target device or group
PowerCapValue Power cap value for the device or group.
Table 53. Output Attributes
Attribute name Description
Id ID of the power policy
NOTE: All targets and corresponding power cap must be passed in the payload.
NOTE: If you are editing power policy on a group, the Targets field must be an array containing the group Id and group
power cap as first value, followed by device id and power cap value of each member device.
NOTE: StartTime and EndTime must be left empty for policy which is active entire day.
NOTE: DaysOfTheWeek must be set as empty array for policy which is active on every day.
/api/PowerService/Actions/
PowerService.EnablePolicies
This method enables a policy.
Supported versions of Power Manager:
● 2.0
● 1.2
● 1.1
● 1.0
Power Policy
49