White Papers
Table Of Contents
- 1 Creating physical groups
- 2 Editing physical groups
- 3 Adding devices in physical groups
- 4 Creating physical group through CSV file
- 5 Reorganizing devices in physical groups
- 6 Removing devices from physical groups
- 7 Visualizing Headroom and Underutilized Racks
- 8 Visualizing racks of physical groups
- 9 Deleting physical groups
- 10 Physical group reports
- 11 Conclusion
- 12 Technical support and resources
Adding devices in physical groups
19 Managing physical grouping of infrastructure devices in OpenManage Enterprise Power Manager
Manage rack -Non dell device
3.3 Adding an unmonitored device in a rack
If there are infrastructure devices that cannot be discovered in OpenManage Enterprise, add the devices
manually in Power Manager to represent the physical structure. After adding the unmonitored device
details, you can add the device to a rack. This results in rather accurate space and power headroom
calculations and allows basic visualization of the device in the console.
Note: The unmonitored devices are not monitored though Power Manager.
1. Launch OpenManage Enterprise, and then click Plugins > Power Management > Power
Manager Devices. The Power Manager Devices tab is displayed.
2. Click UNMONITORED > Unmonitored Devices. All the Unmonitored Devices details are listed
on the tab.
The following table has all the field names of the Unmonitored Devices, their description, if it is a
mandatory field and the value range:
Unmonitored Device attributes
Field
Description
Mandatory
Value Range
Device Name
Provide a unique
device name.
Yes
Combination of characters,
special characters, and
numbers
Limit: 1–255 characters
Description
Provide brief
information about the
device you are adding.
No
Combination of characters,
special characters, and
numbers
Limit: 0–255 characters
Hostname
Provide a hostname.
No
Combination of characters,
special characters, and
numbers.
Limit: 1-255 characters