White Papers
Table Of Contents
- 1 Creating physical groups
- 2 Editing physical groups
- 3 Adding devices in physical groups
- 4 Creating physical group through CSV file
- 5 Reorganizing devices in physical groups
- 6 Removing devices from physical groups
- 7 Visualizing Headroom and Underutilized Racks
- 8 Visualizing racks of physical groups
- 9 Deleting physical groups
- 10 Physical group reports
- 11 Conclusion
- 12 Technical support and resources
Adding devices in physical groups
17 Managing physical grouping of infrastructure devices in OpenManage Enterprise Power Manager
1. Select one device from the list.
2. Right side Device Details for Power Manager panel.
3. Click Update Details to update the device details.
Device Details for Power Manager
The API to view device details is: https://<IP>/api/PowerService/DeviceDetails
For more information about the Power Manager APIs, see the OpenManage Enterprise Power Manager
API document available on the support site.
4. In the Device Details page, provide the Size of Device (U) and Estimated Max Power (W).
5. The Estimated Max Power (BTU/Hr) is calculated and displayed based on the entered Max
Power.
6. Click Apply.
Update device details for Power Manager
The API to update the device details is:
https://<IP>/api/PowerService/Actions/PowerService.UpdateDeviceDetails
For more information about the Power Manager APIs, see the OpenManage Enterprise Power Manager
API document available on the support site.