White Papers

Frequently Asked Questions
28 Emergency Power Reduction (EPR) feature with OpenManage Enterprise Power Manager
Resolution:
Disable EPR and remove static groups or devices from Power Manager. In case of Temperature-Triggered
EPR (Throttle), disable or delete the corresponding Temperature-Triggered policy and retry the operation.
Message displayed on removing static groups with active EPR from Power Manager
Can I add any device(s) monitored or managed in OpenManage Enterprise, into a physical group with
an active EPR applied from Power Manager?
Description:
Addition of devices are restricted into a Rack physical group with an active EPR (Throttle or Shutdown). The
task fails with a message as Unable to add the device to the rack because the Emergency Power Reduction
(EPR) feature is currently enabled on the rack <Rack Group Name>.
Message displayed on adding devices to a physical group with active EPR.
Recommendation:
Disable the EPR applied on the physical group and retry the operation.
Note: Addition of both, Power Manager supported, and unsupported devices are restricted when there is an
active EPR applied on the physical group.