White Papers

Disable EPR using OpenManage Enterprise Power Manager
16 Emergency Power Reduction (EPR) feature with OpenManage Enterprise Power Manager
Message—The Emergency Power Reduction feature is successfully disabled on the target
<Device1>.
Emergency Power Reduction tab in Power Management section
Audit log(s) also mention the task status and corrective actions required for failed EPR actions on target
devices.
Message ID—CPWR0028, Severity—Warning, Category—Configuration
Message—Unable to disable Emergency Power Reduction on the device <Device Name> because it is
unreachable.
Note: If EPR is enabled on a device, and the device is removed from Power Manager due to an expired or
deleted license, then you cannot access the device through Power Manager.
The disable EPR action initiated from Power Manager fails when the device is not reachable. However, the
EPR entry is removed from Power Management > Emergency Power Reduction tab. To disable EPR, go
to the iDRAC or CMC console of the target device and remove the EPR.