Users Guide

● To view all the devices added to Power Manager as individual devices and as a part of groups, click the All Monitored
Devices tab.
5. (Optional) To filter and view the data on any of the tabs:
a. Click a tab.
b. Click Advanced Filters.
c. Select a filter category.
The following filters are displayed for the Static Groups and Physical Groups tabs:
● Group Name
The following filters are displayed for the Individual Devices tab:
● Health State
● Power State
● Connection State
● Name
● Service Tag
● Model
● Type
● Managed State
The following filters are displayed for the All Monitored Devices tab:
● Health State
● Power State
● Connection State
● Name
● Service Tag
● Model
● Type
● Managed State
● Part of Group
6. (Optional) To clear the filters, click Clear All filters.
7. (Optional) To sort any column alphabetically, click the column name so that an arrow is displayed with the column name.
Removing devices
To stop monitoring the devices, remove them from Power Manager.
Prerequisites
Ensure that the following prerequisite is met:
● The Emergency Power Reduction (EPR) is not enabled on the device.
About this task
NOTE:
If a device is removed in OpenManage Enterprise, then that device is automatically removed from Power
Manager.
NOTE: When a device is added individually and as part of a group to Power Manager, ensure that all the instances of the
device are removed from Power Manager to stop monitoring the devices.
To remove a device, perform the following steps:
Steps
1. Launch OpenManage Enterprise.
2. If you are using OpenManage Enterprise version 3.4 or earlier, click Power Management > Monitored Devices and
Groups.
Maintaining Power Manager
45