Users Guide

Adding device details
About this task
To add or edit the device details, perform the following steps:
Steps
1. Launch OpenManage Enterprise.
2. On the Devices page, select a device by clicking anywhere on the row except on Name and IP Address columns.
3. Scroll down to the end of the page to view the Device Details for Power Manager section at bottom right side of the
page.
4. Click Update Details.
The Device Details for Power Manager page is displayed.
5. Provide the size of the device in rack Unit and maximum power consumption of the device in Watts and click Apply.
The power value is automatically converted to BTU and displayed.
The details for the device are updated.
Adding devices in physical group
Prerequisites
Ensure that the following prerequisites are met:
● Add the size the device you plan to add in physical group.
● Emergency Power Reduction (EPR) is not enabled on the group.
About this task
To add devices in a physical group, perform the following steps:
Steps
1. Launch OpenManage Enterprise and perform one of the following steps:
a. On the Devices page, in the left pane expand the PLUGIN GROUPS section.
b. To add devices in a physical group, create a Rack group using steps 3 and 4 of Creating physical groups section.
c. Expand the Physical Hierarchy group until a rack level and click more options.
d. Select Manage Rack option.
The Manage Rack page is displayed.
Or
a. If you are using OpenManage Enterprise version 3.4 or earlier, click Power Management > Rack View.
If you are using OpenManage Enterprise version 3.5, click Plugins > Power Management > Rack View.
The Rack View page is displayed.
To filter and view the data, expand the Advanced Filters option. Following is a list of categories available:
● Group Name
● Health State
● Power State
● Connection State
● Type
Select the categories of your choice and view the filtered data.
b. Click the rack name.
The Manage Rack page is displayed.
2. To add devices discovered in OpenManage Enterprise, click Add To Rack Slot.
The Add Device(s) To Rack Slots wizard is displayed.
3. In Select Device(s) section, select the devices and click Next.
(Optional) To filter and view the data, perform the following steps:
34
Rack management