Users Guide

ManualsBrandsDell ManualsActive System ManagerEMC OpenManage Enterprise Power Manager

Table 7. Power Manager Settings (continued)

Field Description

● Yes—To delete configured alert thresholds and metric

data that is collected from devices and groups when

they are removed from Power Manager.

● No—To retain the configured alert thresholds and metric

data that is collected from devices and groups when

they are removed from Power Manager.

NOTE: When you add a device or group and set Delete

Power Manager data to No, all Power Manager-related

data for that device or group is removed from view but

not deleted, when you remove the device or group from

Power Manager. When you re-add the device or group,

data for that device or group is available again.

Reset WSMAN power metric data Based on data accuracy requirement, select one of the

following options:

● Enabled—To reset the current cumulative energy

consumption (in kWh) for the server or chassis in iDRAC

or CMC. This reset depends on the selected Data

gathering interval.

● Disabled—To not reset the cumulative energy

consumption data in iDRAC or CMC.

NOTE: To delete the data after specific duration, configure the Data purge interval option present in the following

location: OpenManage Enterprise > Application Settings > Console Preferences > Metrics Collection Settings.

The following table provides further information about the mandatory fields and the value range for each field.

Table 8. Details about mandatory data intervals and duration

Field Mandatory Value Range

Power Unit Yes

Watt is the default unit.

● Watt

● BTU/Hr

Temperature Unit Yes

Celsius is the default unit.

● Celsius

● Fahrenheit

Data gathering interval Yes

The default value is 15 minutes.

● 15

● 30

● 60

Duration of top energy consumers Yes

The default value is 3 Months.

● 1 Day

● 7 Days

● 15 Days

● 1 Month

● 3 Months

● 6 Months

● 1 Year

Report Duration Yes