Users Guide
Alert Group Description
EnvMonPowerSupplyStatusGroup Provides information about the power supply status.
Fan Provides information on how well a fan is functioning. Fan alerts provide status
information of fans.
Ifstate This signies that there has been a change in the state of an IPv6 interface.
IGMP Provides information about the Internet Group Management Protocol (IGMP).
Initialization Provides information about the initialization phase of the switch.
Link Provides the link related information.
LLDP Provides information on controlling the transmission of LLDP notications.
LockedPort Provides information about blocked switches.
LoginStatus Generates traps when a CLI session starts or ends.
LoopTrap Generates traps when a loop on an interface is detected.
MAU Provides information whenever a managed repeater MAU enters the Jabber state.
MEP Provides information when there is a change in Fault Alarm.
Network Generated when the sending Agent has transitioned to Master State.
NewRoot Indicates that a new root has been elected
OSPF This signies that an OSPF packet has been received on a non-virtual interface that
cannot be parsed.
PacketPolicy Provides status information when packets have been forwarded or dropped.
PethMainPowerUsage Provides information about power usage On/O notication status.
PimNeighborLossGroup Generated when there is loss of an adjacency with a neighbor.
PingProbe Provides information when a ping probe changed is detected.
PingTestFailed Provides information when a ping test is Failed.
PingTestCompleted Provides information when a ping test is Completed.
PortState Provides the Port State change information.
PortStatus Provides status information for the ports with either an Authorised or Unauthorized
message.
PowerSupply Provides status information of the power supplies.
ProductGlobalStatusChange Provides information of the overall device status.
PSEPORT Provides information about Port On/O status.
Repeater Provides information whenever a managed interface MAU enters the Jabber state.
ResourceOverow Provides status information for switch hardware or software resource overow.
Stacking Provides information about the stack status.
STP Provides information about any changes in the Spanning Tree Protocol.
SFP Provides information about any changes in the Small Form Pluggable (SFP) Protocol.
TargetPath Generated when the path of the target is changed.
Temperature Provides temperature statistics information of the switch.
TFTP Provides information about the status of the Trivial File Transfer Protocol.
30 Using the Dell EMC OpenManage Connection for IBM Tivoli Netcool/OMNIbus